Hyco DF20LL Скачать руководство пользователя страница 3

Страница: 3 / 12

2. IMPORTANT SAFETY POINTS

THE APPLIANCE MUST ONLY BE CONNECTED TO A SINGLE PHASE

SUPPLY.
THE PRODUCT SHOULD ONLY BE CONNECTED TO A SUPPLY THAT

MEETS THE SPECIFICATIONS DETAILED ON THE RATING LABEL.
ELECTRICAL INSTALLATION SHOULD BE CARRIED OUT BY A

QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE LATEST

EDITION OF THE IEE WIRING REGULATIONS.
THE APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING

CHILDREN) WITH REDUCED PHYSICAL, SENSORY OR MENTAL

CAPABILITIES, OR LACK OF EXPERIENCE AND KNOWLEDGE,

UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION

CONCERNING THE SAFE USE OF THE APPLIANCE BY A PERSON

RESPONSIBLE FOR THEIR SAFETY.
DO NOT USE THE HEATER IF THE POWER CORD SHOWS ANY SIGN

OF DAMAGE.
CHILDREN SHOULD BE SUPERVISED TO ENSURE THEY DO NOT

PLAY WITH THE APPLIANCE.
NOT SUITABLE FOR OUTDOOR USE.
WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER

THE HEATER.
THE SURFACE OF THIS APPLIANCE CAN BECOME HOT; NEVER LEAVE

VERY YOUNG CHILDREN OR VERY VULNERABLE PEOPLE UNSUPERVISED

WITH THE HEATER.
CHILDREN AND VULNERABLE PEOPLE SHALL NOT BE ALLOWED TO

CLEAN OR PERFORM MAINTENANCE OF THE HEATER UNSUPERVISED.
DO NOT USE THE HEATER IN CONJUNCTION WITH ANY AUTOMATIC

SWITCHING DEVICE SUCH AS A TIMER.AN OVERHEAT RISK EXISTS

IF UNATTENDED.

Arezzo - DF20LL 9/10/14 14:13 Page 3

Содержание DF20LL





