•
Ensure the supply cord is well secured to the dryer using the provided cable clamp.
•
Ensure the internal power switch is set to the “ON” position.
•
Refit the dryer cover using the 2 x counter sink bolts and serrated washers.
When opting for surface mount wiring, the provided protective grommet must
be fitted and positioned correctly to protect the supply cord from becoming
damaged where it contacts the cover (see figure 3).
•
Turn on the power supply to complete installation.
5
Recommended mounting height
(bottom edge of dryer above finished floor)
M
43”
L
41”
C
39”
C
33”
1
Fuse
Power
switch
Power
230V~
N
UV light
Indicator
Temperature probe
Sensing probe
MOTOR
Temperature
switches
Heater
Thermal fuse
CONTROL
RELAY
L
E
figure 2
figure 3
Recommended mounting height
(bottom edge of dryer above finished floor)
M
43”
L
41”
C
39”
C
33”
1
