Hybrid Systems JSC
Users Manual
Page 5 of 8
GSM 108 Gate
The sketch map of connecting to computer charging system
The installation for connecting to PBX
If users want to connect small PBX to this terminal, connect terminal’s “Phone
port” to the PBX.
Operation
Making Calls
Lift the handset or press “hand-free” key, you will hear dialing tone, then you
can dial the telephone numbers you want to call.
Dialing: dialing the telephone numbers you want to call
On completion of dialed digits, you can press “#” to transmit the called
telephone numbers. If you don't dial any key for continual 6 seconds during the
dialing, terminal transmits called telephone numbers automatically.
During calls, if the telephone numbers is not free ones, the terminal sends out
anti-polarity signal (the signal is used to register cost by charging device).
If the calling party or called party hangs up, the terminal stops sending out
anti-polarity signal.
If users dial barred numbers telephone will give out the sound of three-time
toot to ask the user to hang up.