2
Safety Introductions
WARNING
Please keep
this User Manual for future
consultation. If you sell the fixture to another user, be sure that they also receive this instruction booklet.
Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they also
receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the fixture.
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
Disconnect main power before servicing and maintenance.
Maximum ambient temperature is Ta : 40
℃
. Don’t operate it where the temperature is higher than this.
In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type spare parts.
Do not connect the device to any dimmer pack.
Do not touch any wire during operation and there might be a hazard of electric shock.
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
The housing must be replaced if they are visibly damaged.
Do not look directly at the LED light beam while the fixture is on.
There are no user serviceable parts inside the fixture. Do not open the housing or attempt any repairs by yourself.
In the unlikely event your fixture may require service, please contact your nearest dealer.
Due to the magnifying type lens, please keep the lens out of contact with direct sunlight. Direct sunlight can cause
heat to build up inside of the unit, which will seriously damage unit.
Caution
There are no user serviceable parts inside the fixture. Do not open the housing or attempt any repairs yourself. In the
unlikely situation, your unit may require service, please contact your nearest dealer.
1.Specification:
Control Mode:DMX, Master/Slave ,sound activated, Auto
5CH DMX control
Individual Control Red, Green, Blue &Strobe/Dimmer
Produces a variety of color beams
Electronic dimming: 0-100%
4 Digital LED Display panel
LED Colour:RGB
Power Supply: 220-240 Vac / 50-60 Hz
Power Consumption: 18W
Light Source: 6pcs 3-watt ultra brightness LEDS(R 2,G 2, B 2)
2.LED display
（
Choose the function and press button “ enter “ to confirm
）
No.
display
Function
1
A001
DMX512
（
001
—
512
）
,adjust the DMX address by button up/down
2
A1_1
Red .speed from
（
1
—
9
）
, change motor speed by button up/down
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
