5A
signal was disconnect , the program will return to the original mode.
4.2 Main Function
5. How to control the fixture
There are three ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
C. Controller
A. Universal DMX controller
The fixture can be set to the DMX address remotely by the universal DMX controller. First,
you need to program two scenes into a chase, then link the fixtures to the universal DMX
controller. When you run the chase, all the fixtures of the chain will be set to the series DMX
address automatically. The fixture uses four channels. Please refer to the following diagram
to set the address for the first four units.
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together and operate without a controller. In
