Hybrid HMHSPOT40, Руководство пользователя

Страница: 7 / 16

USER MANUAL - HMHSPOT40 PROFESSIONAL LED SPOT
PAGE 5
HOW TO CONTROL THE FIXTURE
There are two ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
A. Universal controller
The fixture can be set the DMX address remotely by universal DMX controller.
First, you need to programming two scenes into a chase, and then link the
fixtures to the universal DMX controller. When you run the chase, all the
fixtures of the chain will be set the series DMX address automatically.
The fixture uses four channels. Please refer to the following diagram to set
the address for the first four units.
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together and operate without a
controller. In Master/Slave mode, the first fixture will control the others to
give an automatic, sound activated, synchronized light show. This function
is good when you want an instant show. The first fixture it’s DMX input cable
will have nothing connect it, and the other fixtures will be set in slave mode
automatically. Their DMX input cables connect the last fixture DMX output
cable (daisy chain). Any fixture can act as a Master or as a Slave
OR
001 012 023 034
001 014 027 040