5A
dISP
YES
Display forward
no
Display reverse
rPan
no
Pan forward
YES
Pan reverse
rTiL
no
Tilt forward
YES
Tilt reverse
rESt
YES
Reset
5. How to control the fixture
There are two ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
A. Universal DMX controller
The fixture can be set the DMX address remotely by universal DMX controller. First, you
need to programming two scenes into a chase, and then link the fixtures to the universal
DMX controller. When you run the chase, all the fixtures of the chain will be set the series
DMX address automatically. The fixture uses four channels. Please refer to the following
diagram to set the address for the first four units.
001
010
019
028
OR
001
012
023
034
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together and operate without a controller. In
Master/Slave mode, the first fixture will control the others to give an automatic, sound
activated, synchronized light show. This function is good when you want an instant show.
The first fixture it’s DMX input cable will have nothing connect it, and the other fixtures will
be set in slave mode automatically. Their DMX input cables connect the last fixture DMX
output cable (daisy chain). Any fixture can act as a Master or as a Slave
6. DMX512 Configuration
9 channel mode
Channel
Value
Function
CH1
0-255
Pan
CH2
0-255
Tilt
CH3
0-9
Open
10-19
Color 1
20-29
Color 2
