Hybrid HMH 12, Руководство пользователя

Страница: 6 / 12

5-
5. How to control the fixture
There are two ways to control the fixture
A. Universal DMX controller
B. Master/Slave operation
A. Universal DMX controller
The fixture can be set to the DMX address remotely by the universal DMX controller. First,
you need to program two scenes into a chase, then link the fixtures to the universal DMX
controller. When you run the chase, all the fixtures of the chain will be set to the series DMX
address automatically. The fixture uses four channels. Please refer to the following table to
set the address for the first four units.
Channels mode
Unit1
Address
Unit2
Address
Unit3
Address
Unit4
Address
CH16 1 17 33 49
CH30 1 31 61 91
B. Master/Slave operation
The fixture will allow you to link 16 fixtures together and operate without a controller. In
Master/Slave mode, the first fixture will control the others to give an automatic, sound
activated, synchronized light show. This function is good when you want an instant show.
The first fixture’s DMX input cable will have nothing to connect it, and the other fixtures will
be set in slave mode automatically. Their DMX input cables connect the last fixture DMX
output cable (daisy chain). Any fixture can act as a Master or as a Slave