HYBREX AH99-PN, Руководство пользователя

Страница: 4 / 18

2 user manual www.hybrex.com.au / www.hybrex.co.nz
AH99-PN
Glossary and Terminology
Hook Switch
- The switch that moves up and down and activates the phone line when the handset
is lifted from the base.
Off-Hook - A term used to describe the phone in its active mode when the handset is lifted off the
cradle or when the H.F button is pressed.
On-Hook - A term used to describe the phone in an inactive mode. The handset is in the cradle
and the phone is idle.
Installation
Installing the phone
Your phone should be placed on a level surface, such as a desk or table
1. Connect the handset.
2. Connect the telephone line.
Note: Lift handset to confirm dial tone.
Ringer Volume Level
The phone will ring when there is an incoming call. You can set the ringer volume to high, middle
or low (3 levels). The ringer volume switch is on the backside of phone.
Pulse Tone Setting
You can select P (PULSE) or T (TONE) dialing mode according to the requirements from the
local telephone operator. The T/P switch is on the backside of phone.
Flash Time Setting
You can use the Flash feature to access services
provided by your telephone operator.
The Flash time is dependent on the local
telephone exchange or PBX setting. You can
change the setting by using the switch on the
backside of phone.
On the backside of phone, there are 3 switches:
A
- Ringer Volume Switch (High, Middle,
Low)
B
- Tone/Pulse Switch
C
- Flash Time Switch (100ms, 300ms,
600ms)
Operation
Making a Phone Call
Lift handset and dial the desired number to make a call.
Or you can press H.F (Handsfree) button and then dial number to make a call in Handsfree mode
without lifting handset.
Receiving a Call
To answer an incoming call, lift handset or press the H.F key to answer handsfree.
A
B C
P
T
100
300
600