Hy-Ram Fein 117-000196, Руководство по эксплуатации

Страница: 10 / 12

Page 10 of 12
Certificate of Calibration.
•
This product has been inspected and tested in accordance with the ISO9001 quality
control systems and procedures in place at Hyram Engineering Co Ltd.
•
This product has no calibration period, periodic, safety inspections should be carried
out by the operator if in any doubt please contact the manufacturer for further
information
Decommissioning & Disposal Instructions
These give the instructions for decommissioning and disposal of the equipment and
confirm how it is to be taken out of service safely, in respect of the Essential Health
and Safety Requirements.
•
If a Hyram tool has reached the end of its useful working life and cannot be
refurbished it must be disposed of through a licensed scrap or waste disposal
facility. Alternatively, a reverse engineering company could be used to strip the
equipment for recycling purposes.
•
Disposal is the responsibility of the Customer this can also be achieved by
returning the product back to the manufacturer.
Warranty Information.
1.
Extent of Warranty.
(a)
Hy-Ram Engineering Co Ltd warrants to the end-user customer that its products will
be free from defects in materials and workmanship, for six months after the date of
purchase by the end-user customer, subject to providing proof of purchase.
(b) If Hy-Ram Engineering Co Ltd receives, during the warranty period, notice of a
defect in product which is covered by this warranty, Hy-Ram Engineering Co Ltd
shall either repair or replace the product, at its option. Any replacement product
may be either new or like-new, provided that it has functionality at least equal to
that of the product being replaced.
(c) All warranty work will be carried out by Hy-Ram Engineering Co Ltd unless
otherwise agreed. On-site warranty and repair or replacement services are available
from authorised Hy-Ram Engineering Co Ltd service facilities world-wide.
(d) Customers shall prepay shipping charges for products returned to Hy-Ram
Engineering Co Ltd for warranty service, and Hy-Ram Engineering Co Ltd will
charge for return of the products back to the customer.
(e) This warranty statement gives the customer specific legal rights. The customer may
also have other rights which vary from country to country in the world.