Hy-Gain LP-1009A, Инструкция по эксплуатации

Страница: 10 / 29

You may want to mark the bracket location on the
boom with an indelible marker. You can quickly
realign the brackets to these marks when you
install the elements in a later step.
Installation of Tubing Clamps
on Elements
Select the proper size tubing clamps as shown in
Figure 5. When installing the clamps, place the
clamp near the tube end with the top of the clamp
over the slot in the tube as shown in Figure 5.
After adjustment of the tubing lengths, tighten the
clamp with a 5116 inch nut driver, socket or open
end wrench until the tubing will not twist or tele-
scope. DO NOT overtighten! Also, if you loosen
and re-tighten a clamp more than 5 times, we
suggest that you replace the clamp. After repeated
tightenings, these clamps may become difficult to
completely tighten. Should you need to replace
these clamps, use only high quality stainless steel
clamps to ensure proper torque.