Hy-Gain DIR-73, Инструкция по эксплуатации

Страница: 18 / 31

Driven Element, Reflector and Director
Linear-Loading Wire Assembly
Select the parts listed in Figure 10. Assemble
the linear-loading wire assembly as shown in
Figure 10 for each half of the driven element,
reflector and director.
Start assembling the LLW sections to the ele-
ment, beginning at the 40 meter insulators.
Position the tubing clamp (Item 42) as close as
possible to the 40 meter insulator as shown in
Detail A, Figure 11. Other clamp and wire
positions will depend upon the final assembly
of the linear loading wires.
Refer to Figures 11 and 12 for assistance in
identifying and assembling each assembly.
Ite Item
No.
8
Description
Tube, Element, DE3, R3 & D3,7/8" x 55"
No.
Description
9 Tube Element DE2 R2 & D2 1" x 51" 22 Lockwasher, internal, ' #6
11 "Hairpin", LLWI, 69" 29 Bolt, hex head, l/4"-20 x
12 "Hairpin", LLW2, 28" 32 Lockwasher, internal, 1/4"-20
13 "Hairpin", LLW3, 631/2" 34 Nut, hex, 1/4 -20
15 "Hairpin", LLW5, 631/2" 36 Bolt, hex head, #10-24 x 1/2
20 Bolt, round head, #6-32 x 2" 38 Nut, hex, #10-24
21 Nut, hex, #6-32 40 Lockwasher, internal, #10
47 Insulator, Rod Support
Figure 10 Linear-Loading
Wire Assembly
NOTE: If the Discoverer 7-2 was previously
assembled, you need only to assemble the
linear loading wires on the new director
element.