background image

ZERO-TURN SERIES 

ZT-1230 

 ZT-1630

2

3

MAINTENANCE & TROUBLESHOOTING MANUAL

 ZT5.0-M REV A

FORWARD

This manual refers to Serial Number(s):

ZT-1230

  ZT12-50001 -

ZT-1630

  ZT16-50001 -

For older Serial Numbers refer to our website, 
www.hybridlifts.com/Manuals.htm

General Information

2647 Hwy 175
Richfield, WI 53076
U.S.A.

 +1-262-644-1300

 +1-262-644-1320
 www.hybridlifts.com

Service Information

 +1-262-297-5195

 [email protected]

Parts Information

 +1-262-297-5196

THE OPERATION AND SAFETY MANUAL MUST BE

READ AND UNDERSTOOD PRIOR TO OPERATING THE 

MACHINE.

ANY MODIFICATION ON THIS MACHINE WITHOUT 

THE EXPRESS WRITTEN CONSENT OF THE

MANUFACTURER IS PROHIBITED.

Original instructions are written in English

The purpose of this Maintenance Manual is to provide qualified service personnel with information for 
servicing and maintaining Hy-Brid Lifts. All information in this manual must be read and understood before any 
attempt is made to service this machine.

The operation and safety manual is considered a part of the work platform and contains instructions and 
operating procedures essential to properly and safely operate the Custom Equipment Hy-Brid Lift. Users must 
read and understand all information in the Safety and Operations Manual before operation.

• 

The user/operator should not accept operating responsibility until the manual has been read and 
understood as well as having operated the lift under supervision of an experienced and qualified operator.

• 

Because the manufacturer has no direct control over machine application and operation, proper safety 
practices are the responsibility of the user and all operating personnel.

Register your Hy-Brid Lift at:

www.hybridlifts.com/RegisterOnline.htm

Register your Hy-Brid Lift to:

• 

Recieve product updates and recalls

• 

Recieve service bulletins, product and part 
recalls, and other important notifications

• 

Comply with ANSI A92.20 Standards

• 

Provide better records for service

REGISTERING YOUR MEWP WITH THE 

MANUFACTURER IS AN ANSI A92.20 

REQUIREMENT.

Содержание ZERO-TURN Series
























Отзывы: