SUPO 647
REV D
Operation & Safety Manual
HB-P4.5 / HB-P5.O
9
SECTION 2 | SAFETY
2.1 | Safety Symbols
Warnings and instructions that have a direct impact on safety are identified with the following sig-
nals:
FAILURE TO FOLLOW THIS WARNING WILL
CAUSE DEATH OR PERSONAL INJURY.
“DANGER” indicates an imminently hazardous
situation, which, if not avoided, will result in
death or serious injury.
FAILURE TO FOLLOW THIS WARNING MAY
CAUSE DEATH OR PERSONAL INJURY.
“WARNING” indicates a potentially hazardous
situation, which, if not avoided, could result in
death or serious injury
FAILURE TO FOLLOW THIS WARNING MAY
CAUSE INJURY OR DAMAGE EQUIPMENT
“CAUTION” indicates a potentially hazardous
situation which, if not avoided, could result in
minor or moderate injury or damage to equip-
ment
2.2 | General Rules and Precautions
Custom Equipment, Inc. designed the Hy-Brid Lift push-around scissor lift to be safe and reliable. It
is intended for elevating personnel, along with their necessary tools and materials to overhead work
locations. Vibration does not create significant hazards on this machine.
An operator of any type of work platform is subject to certain hazards that cannot be protected by
mechanical means. It is therefore essential that operators be competent, careful, physically and
mentally fit, and thoroughly trained in safe operation of this machine. Although Custom Equipment,
Inc. conforms to specified EN: 280 requirements, it is the responsibility of the owner to instruct
operators with the safety requirements made not only by Custom Equipment, Inc., but by the vari-
ous safety boards in your area, as well as additional requirements set forth by EN: 280 If you come
across a situation that you think might be unsafe, stop the platform and request further information
from qualified sources before proceeding.
DANGER
WARNING
CAUTION