HXM XD-450A, Руководство пользователя

Страница: 3 / 29


direct sunlight (near a window),

high temperatures (near a heat source,
outside, or in a car during the daytime),

excessive humidity,

excessive dust,

strong vibration.

The drum contains digital circuitry and may
cause interference if placed too close to radio
or television receivers. If interference occurs,
move the drum further away from the affected
equipment.
POWER
 Turn the power switch off when the drum is
not in use.
 To avoid damage to the drum and other
devices to which it is connected, turn the
power switches of all related devices off
prior to connection or disconnection of
audio cables.
 Turn the power off if the main cable is
damaged or the instrument is spattered with
liquid.

Do not switch the unit on and off in quick
succession, this places an undue load on
the electronic components.
 Unplug the AC power cord during an
electrical storm.
 Avoid plugging the AC adaptor into the
same AC outlet as appliances with high
power consumption, such as electric
heaters or ovens.
SERVICE AND MODIFICATION
This product should be serviced by qualified
service personnel when,
 the power supply cord or the plug has been
damaged,

liquid has been spattered into the unit or it has
been exposed to rain,
 the instrument does not appear to operate
normally or exhibits a marked change in
performance,
 the instrument has been dropped or the
cabinet has been damaged.

Do not attempt to open the unit or make any
change in the circuits or parts of the unit.
HANDLING AND TRANSPORT

Never apply excessive force to the controls,
connectors, pads or other parts of the
instrument.

Always unplug cables by gripping the plug
firmly, not by pulling on the cable.

Physical shocks caused by dropping,
bumping, or placing heavy objects on the
instrument can result in scratches and/or
more serious damage.
 Carefully check the amplifier volume control
before stating to play. Excessive volume can
cause permanent hearing loss.
CLEANING
 Clean the unit with a dry or light-wet soft cloth.
Do not use paint thinner or petrochemical
based polishes.
LOCATION
Do not expose the drum to the following condi-
tions to avoid deformation, discoloration, or more
serious damage,
DO NOT ATTEMPT TO OPEN THE UNIT OR MAKE ANY CHANGE IN THE CIRCUITS OR
PARTS OF THE UNIT
.
TAKING CARE OF YOUR DRUM
!