HWASHIN POWERSONIC 605 Скачать руководство пользователя

Страница: 12 / 16

Cleanion Solutions

Troubleshooting Guide

Acidic water-based solutions : remove rust, tarnish or scale.

Alkaline water-based solutions :

Mild :

Light oils, greases, cutting oils, coolant compounds.

Mild to strong :

Heavy greases and oil, waxes, vegetable oils, inks, milk residues.

Heavy-duty :

Mill scale, heat-treat scale, corrosion or oxides.

If your cleaner does not operate satisfactorily, please check the tables below for possible causes before calling your
service center.

Problem

Cause

Solution

Unit doesn

’

t start

1. Unit not plugged in properly
2. Power button not on
3. Faulty start button
4. Faulty fuse

1. Plug into electrical outlet
2. Press power button on
3. Call nearest service center
4. Replace new fuse
(located on back of the unit/
fuse box)

Unit operates but

does not heat solution

Faulty heater elements

Call nearest service center

Unit operates but

time/temp display

does not function

Faulty time/temp elements

Call nearest service center

Decreased

ultrasonic activity

1. Solution is spent or dirty
2. Solution level is too low
3. Liquid level is incorrect for

load

4. Bath bottom is covered with

soil particles

5. Solution is not degassed

1. Change solution
2. Add more solution
3. Adjust level with load until

activity increase

4. Clean bath with warm water

and wipe with a nonabra-

sive cloth

5. Make sure that bath was

filled with water and has run

5 minutes

Clogged drain

Clogged drain or hose

Call nearest service center

Содержание POWERSONIC 605

















Результаты поиска

Содержание POWERSONIC 605

Отзывы:

Похожие инструкции для POWERSONIC 605

Бренды по названию

Популярные бренды

HWASHIN POWERSONIC 605, Инструкция по эксплуатации

Результаты поиска

Содержание POWERSONIC 605

Отзывы:

Похожие инструкции для POWERSONIC 605

Бренды по названию

Популярные бренды