HWg-WLD – manual
HW group
www.HW-group.com
First steps
1) Connecting the cables
Connect the unit to the Ethernet (patch cable to a switch, or a cross-over cable to a PC).
Plug the power adapter in to a power outlet and connect it to the HWg-WLD power connector.
The green
Power & Mode
LED in the RJ45 connector lights up.
If the Ethernet connection works properly, the
LINK
(yellow) LED lights up after a short while,
and then flashes whenever data transfer takes place (activity indication).
After power up, the
LINK
LED flashes rapidly to indicate IP address negotiation over DHCP.
2) Configuring the IP address – UDP Config
UDP Config
utility – see root directory of
the supplied CD (Windows and Linux
versions).
Alternatively download from
Software > UDP Config.
Click the icon to launch
UDP
Config
. The program automatically
looks for connected devices.
To search for devices, click the
Find Devices
icon.
The program looks for devices on your
local network. Double-click a MAC
address to open a basic device
configuration dialog.
Configure network parameters
IP address / HTTP port (80 by
default)
Network mask
Gateway IP address for your
network
Device name (optional)
Click the
Apply Changes
button to save
the settings.
Содержание HWg-WLD
Страница 1: ...HWg WLD MANUAL...