HW Group HWg-PWR 12, Руководство пользователя

Страница: 20 / 44

HWg-PWR 3 / 12 / 25 MANUAL HW group
September 2013 page 20
SNMP tab
The SNMP tab is used to configure SNMP communication parameters and target destinations
for SNMP Trap alarms.
General SNMP Settings section

System Name – Name of HWg-PWR within SNMP.

System Location – Location of HWg-PWR within SNMP.

System Contact – Contact info of the HWg-PWR administrator within SNMP.

SNMP port – Port number for SNMP communication. The default is 161.
SNMP Access section

Community – Name of the SNMP community for accessing HWg-PWR over SNMP. Two
communities can be defined. Each Community can have the following permissions
defined:
o
Read
o
Write
SNMP Trap Destination section

Destination – Index of the target destination for SNMP traps. Only A can be set, other
indexes are reserved for future use.

Community – Name of the Community where the SNMP trap is sent.

IP Address – Target IP address for SNMP Traps.

Port – Target port for SNMP Traps. Default is 162.

Enable – Activation of the target destination. Useful for disabling all SNMP traps
without regard to the settings for individual values.