HW Group HWg-PWR 12, Руководство пользователя

Страница: 19 / 44

HWg-PWR 3 / 12 / 25 MANUAL HW group
September 2013 page 19
General Setup tab
The General Setup tab is used to configure basic operating parameters of HWg-PWR.
Base section

Device Name – Custom name for the HWg-PWR unit. Allows distinguishing individual
units in a network. Maximum device name length is 16 characters.

WWW Info Text – Custom text in the WWW interface footer. Useful for contact
information about the operator of that particular HWg-PWR, if the device is accessible
on a public IP.

Periodic restart – Enables periodic restart of HWg-PWR to prevent problems in noisy
Ethernet networks or to limit the consequences of hacker attacks.
Network section

DHCP – Enables IP address assignment by a DHCP server, if available. Ask your network
administrator if unsure about the correct setting.

IP Address – IP address of HWg-PWR. Assigned by your network administrator.

Network Mask – Network mask. Assigned by your network administrator.

Gateway – IP address of the default gateway. Assigned by your network administrator.

DNS Primary / DNS Secondary – IP address of your DNS server. Assigned by your
network administrator.

HTTP Port – Port number where the built-in WWW server listens. Changing the port
number is useful in situations where multiple HWg-PWR units need to be accessible
from an external network through a router. Ask your network administrator if you
need to change this value. The default port is 80.
Security: Device Admin section

Username / Password – User name and password for securing access to HWg-PWR.