XIII. F the instructions on new features
1. Configuration thermal printers：When printing more quickly, no noise.
Instrument can automatically according to the environment temperature, adjust
the print quality, ensure to print more clear.
2. Discharge tip：Wiring in the testing process automatic monitoring
situation, if in the loop have poor contact or strike fire situation, on the left side
of the screen in the instrument will display and the number of discharge, in
general, lower the number of electricity is not more than 20。
3. CVT change than the test：Instrument of the high tension line conductor
red upper clip of CVT, and bus bar down. CVT lower ground, low-tension wire
red and black clip the secondary winding, note: if the test point of view, is close
to 180 degrees should be red and black clip upside down.
23
