Huvitz HS-5000 5X Скачать руководство пользователя страница 45

-------------------------------------------------------------------------------------SLIT LAMP 

HS-5000 5X

  45

 

14. Service Information

How to contact service: If there are any problems with the equipment, please follow the 

steps below: 

z

 

First of all, refer to the 10. Maintenance and 11. Troubleshooting sections according 

to the problem that you are encountered. And then follow the suggested sequences.   

z

 

If the problem persists, please contact the local distributor in your province or country 

at first.   

z

 

Before calling to the local distributor, you’d better check these information such as 

Model and Serial Numbers. To do so, fill up the following table as soon as you   

purchase our product. You can look up these information at any time. The serial 

number is found on the back of this unit. The serial number is unique to this unit. 

You should retain this manual as a permanent record of your purchase. Please retain 

your purchase receipt as your proof of purchase.   

Date of Purchase: 

Dealer’s Name: 

Dealer Address: 

Dealer Phone No. : 

Model No.: 

Serial No.: 

z

 

If you can’t contact with your local distributor, you can directly get in touch with the 

service department of the HUVITZ using the phone number and the address written 

in the below table.   

Содержание HS-5000 5X















































Отзывы: