Huvema VBS-2012H-CE, Руководство оператора

Страница: 12 / 33

- 11 -

SET SELECTION
Always use rake set except:
1. For work of varying cross section use wave set.
2. When one blade must be used for a range of
material sizes use wave set.
Available set:
Standard
Carbon …………………………..………rake, wave
Dart …………………………...….……...rake, wave
Demon ………………………....……...………. .rake
Super Demon ……………..……..……….….....rake
The basic band saw blade tooth forms.

TOOTH FORM SELECTION
1. For finer than 6 pitch, Precision is only choice.
2. For 6 pitch and coarser, Claw Tooth usually gives the best tool life and fastest cutting rate.
3. For best finish, Precision and Buttress are usually preferred.

GAGE SELECTION
Use standard gage except when increased work thickness
decreases accuracy and width cannot be increased to
compensate. Example for heavy gage application:
1.
When radius cutting in thick materials.
2. When maximum width usable on machine provides
insufficient beam strength.

PITCH SELECTION
Select best pitch from Sawing Recommendations Tables or
Job Selector. If this pitch is not available in desired width:
1.
Thick material; choose the nearest pitch.
2.
Thin material; reduce width until pitch is found.
3.
Have at least two teeth in work at all times. Ten are
preferable for hand feeding, 20 for power feeding.
Pitch is the number of teeth per inch.