Huvema TL-400-A, Руководство пользователя

Страница: 6 / 20

6
3. INDICATIONS REGARDING TRANSPORT AND STORAGE.
The machine is delivered on a pallet in order to be transported by forklift.
Store in the vertical position.
Do not stack.
If the machine remains stored for a long period of
time, periodically lubricate. Do not expose to the
elements.
The packaging is made of properly designed and
sized wood, and it is also supplied wrapped in plastic.
CAUTION
Do not improperly dispose of the packaging. Send this material to be recycled or disposed of
in accordance with all legislation in force.
4. INSTRUCTIONS FOR ANCHORING AND SERVICE START-UP.
4.1. Anchoring instructions.
Ensure that the machine has not suffered any damage during transport by making an initial
visual inspection. If damage is observed, advise the manufacturer immediately.
The machine must be installed on a firm and level surface in order to thus reduce vibrations
during operation and so that the machine operates within the parameters established by the
manufacturer.
4.2. Power supply connection.
Verify that the power supply voltage
corresponds to the voltage indicated on the
specifications plate of the machine. Connect the cable
to the power supply using a plug that is appropriate for
the characteristics of the same, thereby respecting the
colour codes.
Once the machine is connected, verify that the
motor rotation agrees with the direction of the saw blade
teeth (rotation to the right). If the motor rotation were not correct, change the two phases of the motor.
Then check the rotation again.
The pneumatic connection must be made to the supply system using a tube that is appropriate
for the spigot of the machine. Adjust the pressure at the filtering group.
Huvema
TL-400-A