HUUM HIVE Heat, Руководство пользователя

Страница: 9 / 56

9
pieces of material which are more porous and lighter compared
to the rest of the fuel quantity.
• When new, the damper movement can be rigid. During the first
heatings the damper should be moved every 10-15 minutes to run
the damper in.
• If necessary, the supply of combustion air can be adjusted
by controlling the draught of the air vents in the front side
of the heater by changing the position of the shutter. It is
recommended to keep the ash tray open by up to 2 mm for
ignition. During heating, it is recommended to keep the air vents
fully open at the top of the front side of the heater.
• Keep the furnace door closed during heating. Open the door only
to add firewood.
• Avoid overheating the sauna stove; overheating is indicated when
the furnace case glows red. Overheating causes the metal to
deform, and the manufacturer is not responsible for this defect.
• In the case of overheating, the ash tray must be completely
closed to stop the furnace combustion process. Keep the
furnace door closed. If possible, cut off air flow to the room.
• Avoid splashing water onto the hot glass of sauna stoves with a
glass door. Tempered door glass is not under warranty.
• The heating time of the steam room is dependent on the thermal
resistance of the wall materials, room size and power of the
sauna stove.
• The outer surfaces of the sauna stove are hot during heating.
Contact with exposed body parts can cause burns.
• Do not splash salt water onto the sauna stove.
• It is not advisable to throw hard water or water with a high iron
content onto the sauna stove.
NB! Do not exceed the humidity indicated on the chart when steaming.
Maintenance
• For safe operation of the furnace, it is advisable to keep cleaning
accessories (shovel, broom, rake) in the lower temperature
(below 40°C) part of the steam room.