HUUM CLIFF 10, Инструкция по установке и эксплуатации

Страница: 3 / 40

4 5
Table 1 Output
kW
Room
m 3
Weight
kg
Ø
mm
H
mm
A
mm
B
mm
Fuse
A
Power cable
mm
2
CLIFF 3,5 3,5 3,5-6 10 270 1000 60 420 1 x 16 3 x 2,5
CLIFF 6 6 5-10 15 270 1000 60 390 3 x 10 5 x 1,5
CLIFF 9 9 8-15 16 270 1000 120 610 3 x 16 5 x 2,5
CLIFF 10 10,5 10-17 16 270 1000 120 610 3 x 16 5 x 2,5
INSTALLATION
Positioning the heater
• The heater must be positioned in such a way that there is a safe
distance between flammable materials and the heater.
• The heater must be installed in a way that prevents people
from having physical contact with the heater or that dangerous
situations could emerge during the heating process.
• The heater holds approximately 75 kg of stones.
• The inputs of the power cable are on the bottom cover of the heater.
Connecting the heater to the power supply
• Only a certified electrician is allowed to connect the heater to the
power supply.
• A rubber insulated HO7RN-F cable or an equivalent cable must be
used as the connection cable.
• It is recommended to connect the unit to the mains without an
earth-leakage circuit breaker.
THINGS TO CHECK BEFORE INSTALLATION
• Does the output (kW) match the volume (m 3 ) of the sauna room?
See Table 1.
• In case there are any uninsulated brick, tile or glass walls in the
sauna room, an additional volume of 1.5 m³ should be added to the
sauna room for each such square meter of the wall.
• The suitable output of the heater will be determined based on that
volume according to Table 1.
• The producer’s warranty guarantee is invalid if the heater and
sauna room have been dimensioned incorrectly!
• Minimal safe distances between the sauna room’s ceiling and walls
to consider in installing the electric heater are listed in Table 1.
* CLIFF 3.5 is attached to the wall with a special bracket
400V 3N / 230V 1N 230V 1N
L1 L2 L3 N L1 N