HUSTLER Raptor X Скачать руководство пользователя страница 34

REV A

4-8

607768

NOTES:

1.

Initial engine oil change between 5 and 10 hours of operation. Thereafter, change oil after every 40 – 60 hours of operation or annually, which-
ever comes first. Change more often under dusty or dirty conditions and during hot weather periods. Hustler

®

 Motor Oil is recommended.

2.

Torque initially and after first 2 hours of operation.

3.

Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual for recommendations and other 

maintenance items.

4.

Service more often under dusty or dirty conditions. Use caution when servicing to prevent dust contamination in the engine. 

Do not

 clean filter 

element. Replace with a new one.

5.

Pump drive belt only - Inspect every month

 and replace if worn or cracking is noticed. Otherwise, 

replace every 2 years

.

6.

Check fuel system for any cracks or leaks including, but not limited to, fuel line hoses, fuel valve, vent line hoses, vent valve, vapor valve, and 

grommets. Replace as needed.

7.

More often under dusty or dirty conditions and during hot weather.

8.

Refer to engine owner’s manual for engine service information.

* After completing maintenance cycle (100 hours), repeat cycle.

Maintenance Schedule

Refer to Figure

 4-12, 

Figure

 4-13, 

Figure

 4-14, 

Figure

 

4-15, & Figure

 4-16

SERVICE AT

INTERVALS INDICATED

WEEKLY

OR 40

HOURS

* ANNUALLY

OR 100

HOURS

Verify safety start interlock system

Prior to each use

Visually inspect unit for loose hardware and/or damaged parts

Prior to each use

Visually inspect tires

Prior to each use

Check oil level, engine (1)

Prior to each use or every 4 hours

Clean air intake screen (7)

Prior to each use or every 4 hours

Check fuel level

Prior to each use

Blades - sharpen & securely fastened

Prior to each use

Discharge chute - securely in place & in lowest position

Prior to each use

Check tire pressure with a gauge

Prior to each use

Clean engine and transmission compartment

After each use

Replace engine air cleaner element (4) (8)

As needed

Change engine oil & filter (1) (3)

X

Clean cylinder and head fins (8)

X

Check battery connections 

X

Clean engine exterior (8)

X

Tighten drive wheel axle bolts (2)

X

Clean & regap spark plugs (8)

X

Check transmission & deck belt tension and condition (5)

X

Check fuel system (6)

X

Check fuel tank grommet (6)

X

Change fuel filter (6)

X

Replace fuel evaporation system filter (7)

X

Replace spark plugs (8)

X

Содержание Raptor X











































Отзывы: