HUSTLER FasTrak SmoothTrak Steering, Руководство пользователя, Страница: 139 / 424

608622CE 4-3 REV A
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV
Fuel and Evaporative Emissions Control System
IMPORTANT: Refer to the Safety section of this manual for
fuel handling safety information.
IMPORTANT: Refer to the engine owner’s manual for addi -
tional emissions control information.
Use only Hustler
®
approved replacement parts.
Your evaporative emission control system may include
parts such as:
• fuel tanks
• fuel lines
• fuel line fittings
• fuel caps
• canister mounting brackets
• carburetor purge port connection
• filters
• vapor hoses
• clamps, control valves
• control solenoids
• electronic controls
• vacuum control diaphragms
• purge valves
• liquid/vapor separator
The dual fuel tanks are located in both fenders. Figure 4 - 5
Park the mower on level ground before filling fuel tank.
Clean the area around the fuel cap before removing the
cap. Remove the fuel cap slowly.
When threading the fuel cap onto the filler neck, tighten the
cap until it begins to click, then, continue to turn it until at
least three clicks are heard.
IMPORTANT: Do not overfill the fuel tank. The fuel tank
should be filled no higher than the bottom of the fill neck. The
A. Expansion tank
Figure 4 - 3
A. Filter B. Filter guard
Figure 4 - 4
A
A
B
Use of replacement parts not equivalent to the
original parts may result in system failure and
pose a safety hazard.
A. Fuel cap
Figure 4 - 5
W
AR
N
IN
G
A