HUSTLER 125223 Скачать руководство пользователя страница 8

Страница: 8 / 10

8 of 10

125176 A

Operating

When the catcher is in operating position both switch plungers are fully depressed. Fig. 13

In the operating mode the bag presence switch and the bag closed switch are fully depressed. In the

dumping mode the bag closed switch is disengaged. The deck will automatically disengage.

NOTE:

During normal operation it is recommended the operator disengage the deck by depressing the deck clutch

switch. The mower can be driven away from clippings and the operator can lower the bag into operating position.

If you continue to catch grass after the dust baffle has deflated you may need to remove blockage that has

Remove bag assembly from catcher mount after the blades have stopped. Use a stick to clear the discharge

area. Never use your hand to clear debris from the discharge area.

FIG. 13

INDEX NO.

DESCRIPTION

SWITCH STOP

BAG CLOSED SWITCH

BAG PRESENCE SWITCH

Catcher bag in operating position

Catcher bag in dumping position

DANGER

Stop the engine before removing the grass catcher or unclogging the discharge chute. Never clear the

discharge chute with the engine running. Turn off the engine and be sure the blades have stopped before

cleaning. Use a stick to clear a plugged discharge area.

Never use your hand!

Содержание 125223










