P/N 9FQ-6-P110-075-00_B
3-1
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
Open Vertical Merchandisers
CARE AND CLEANING
Long life and satisfactory performance of
any equipment is dependent upon the care it
receives . To ensure long life, proper sanitation
and minimum maintenance costs, these
merchandisers should be thoroughly cleaned,
all debris removed and the interiors washed
down, weekly .
Exterior Surfaces
The exterior surfaces must be cleaned with a
mild detergent and warm water to protect and
maintain their attractive finish .
N
ever
use
abrasive
cleaNsers
or
scouriNg
pads
.
Interior Surfaces
The interior surfaces may be cleaned with most
domestic detergents, ammonia based cleaners
and sanitizing solutions with no harm to the
surface . Self contained models empty into a
limited capacity drain pan, which will overflow
if excess water is used in cleaning .
Do NOT Use:
•Abrasive cleansers and scouring pads, as these
will mar the finish .
•Coarse paper towels on coated glass .
•Ammonia-based cleaners on acrylic parts .
•Solvent, oil or acidic based cleaners on any
interior surfaces .
•Do not use high pressure water hoses .
Do Use:
•Remove the product and all loose debris to
avoid clogging the waste outlet .
•Store product in a refrigerated area such as a
cooler . Remove only as much product as can
be taken to the cooler in a timely manner .
•Disconnect electrical power before cleaning.
•Thoroughly clean all surfaces with soap and
hot water .
d
o
Not
use
steam
or
high
water
pressure
hoses
to
wash
the
iNterior
.
These will destroy the merchandisers’ sealing
causing leaks and poor performance .
•Take care to minimize direct contact between
fan motors and cleaning or rinse water .
•Do NOT flood merchandiser with water .
N
ever
iNtroduce
water
faster
thaN
the
waste
outlet
caN
remove
it
.
•Allow merchandisers to dry before resuming
operation .
After cleaning is completed, turn on
power to the merchandiser .
REMOVING SCRATCHES FROM
(OPTIONAL) BUMPER
1 . Use steel wool to smooth out the surface
area of the bumper .
2 . Clean area .
3 . Apply vinyl or car wax and polish surface
for a smooth glossy finish .
MAINTENANCE
Bumper
