Hussmann MicroSC ISMGG2DA-A, Руководство по установке и эксплуатации

Страница: 7 / 36

P/N 3110586_A 1-3
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.
ISMGG2DAA Merchandisers
MODEL DESCRIPTION
ISMGG2DAA merchandisers offer versatility
for the display of food items such as: fresh
fruit, vegetables, cheeses and other delicatessen
items. Carefully read and follow the instruc-
tions prior to operating the merchandiser.
UNLOADING
Unloading from Trailer:
Lever Bar (also known as a Mule, Johnson
Bar, J-bar, Lever Dolly, or Pry Lever)
Move the merchandiser as close as possible to
its permanent location and remove all packaging.
Check for damage before discarding packaging.
Remove all separately packed accessories such
as kits and shelves.
Improper handling may cause damage to the
merchandiser when unloading. To avoid damage:
1. Do not drag the merchandiser out of the
trailer. Use a Johnson bar (mule).
2. Use a forklift or dolly to remove the
merchandiser from the trailer.
EXTERIOR LOADING
Do NOT walk on top of merchandisers
or
damage to the merchandisers and serious
personal injury could occur. Do not stand
inside of merchandiser
SHIPPING SKID / CRATE
Each merchandiser is shipped on a skid to
protect the merchandiser’s base, and to make
positioning the case easier.
Do not remove the shipping skid until the
merchandiser is near its final location.
The
skid provides protection for both the merchan-
diser and the floor.
DO NOT TILT MERCHANDISER ON ITS
SIDE OR END WHEN REMOVING SKID.
Once the skid is removed, the merchandiser
must be lifted —NOT PUSHED— to reposition.
Check floor where merchandisers are to be set
to see if it is a level area. Determine the highest
part of the floor.
To remove the shipping crate do the following:
Do NOT remove shipping crate until the
merchandiser is positioned for installation.
Do NOT stand or walk on top of
merchandiser. Do not store items or
flammable materials atop the unit.