Hussmann IMPACT D5ELE, Подключение

Страница: 1 / 7

For Medium Temperature Merchandisers
D5ELE/D5EE END CASES
TO D5 PARENT CASE
JOINING INSTRUCTION
HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 (Printed in U.S.A.)
®
1
B
e sure Merchandisers have
been leveled according to the
installation instructions.
Carefully unpack and inspect
the Joint Kit making sure
there is no breakage or
damage.
1
R
EMOVING
S
HIPPING
B
RACES
.
Remove Bolts, Washers and
Nuts
from
Shipping Braces.
Then remove the shipping
brace
Brackets. See Figure 1
and Detail A.
After removing the braces
and brackets, make sure to
replace the screws that hold
the top panels in place.
July, 2000
P/N 407199
JOINT KITJOINT KIT
Fig. 1. Removing Shipping Braces
Side View
Bracing
PARTS LIST
Item
Quantity Description
19" Front 23" Front
1. 1 1 Gasket
1/
2
x
1/
2
x 60
2. 1 1 Gasket
1/
2
x 1
5/
8
x 120
3. 4 4 Joining Brackets
4. 12 12 Hex Washer Head SM Screw
3/
4
10 -16
5 2 4 Cap Screw
5/16
-18 x 4
6. 2 4 Flat Washer
5/16
7. 8 8 Cap Screw
1/4
- 20 x 1
8. 8 8 Flat Washer
1/4
9. 2 2 Cap Screw
5/16
- 18 x 2
1/
2
10. 4 4 Flat Washer
5/16
11. 2 2 Lock Washer
5/16
12 2 2 Hex Nut
5/16
- 18
13. 2 2 Threaded Rod
1/2
-13 x 15
14. 4 4 Flat Washer
1/2
15. 4 4 Hex Nut
1/2
-13
16. 1 1 Butyl Tape
17. 2 2 Splashguard Joint Support
18. 8 8 Hex Head Sheet metal Screw #8 x
1/2
Note:
Nut retainers are factory installed in the left end, and alignment pins are factory installed in the right end of each
merchandiser.
Detail A
Sheet Metal
Screws