C2-LEP
Technical Data Sheet
HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.
8 of 8
Impact
C2-LEP
Dairy / Delicatessen
Precut & Packaged Produce
R e m o v e
S c r e w s
Remove Screws
B a l l a s t
C a n o p y T o p P a n e l
Foil-covered
Anti-sweat
Heater
Canopy
Canopy
Anti-Sweat Heater Wires
with Purple Markers
Electrical
Wireway
CANOPY AND SHELF LAMP BALLAST
The ballast for the canopy and shelf lamps is located
behind the canopy on the left-hand end (when facing
case) of the merchandiser.
To access the ballast:
1. Remove screws at bottom edge of canopy and rear
of top panel.
2. Remove the one piece canopy top panel by moving
panel forward slightly to clear flange in front then
lifting up.
3. Service or replace ballasts as required.
4. Reassemble items as they were originally installed.
NOTE
: Rail lamp ballast is located behind the lower
front panel.
CANOPY ANTI-SWEAT HEATER
The canopy anti-sweat heater location is shown below.
Connections are in the Electrical wireway.
