H1 Self Contained glass front multideck
Installation manual
________________________________________________________________________________________________________________________
Hussmann
Page
8
•
Wipe case with a clean, damp cloth, if necessary
Starting up
•
Check supply power is ready and correct voltage. (by Licensed Person)
Turn case power on
Start up checks
– by qualified persons only
Check that all fans and lights are working correctly.
Check and set if necessary expansion valves as per Product Engineering Data
– Available from Hussmann.
Approximately 24 hours after start-up, check that the case is at correct operating temperature (refer the Product
Engineering Data).
Decommissioning
Plan and risk assess the decommissioning process to include the following:
Isolate the case.
Removal of the case is to be in the reverse order of installation listed previously.
Disposal
Case disposal is to be carried out by the following:
Metal component removed and recycled
Remaining by commercial waste management
Maintenance
General
•
Do not use abrasive, solvent, ammonia or oil based cleaners,
•
Do not use steam or high pressure systems to clean the case as they may reduce the life and alter the
performance of the case
•
The case does not have a floor drain.
Do not
bucket more than 2 litres into the case during cleaning.
•
Avoid contact between cleaning products and electrical components. Keep electrical connections dry at all times.
•
Wear protective gloves to prevent scratches or cuts
•
Wear safety glasses when there is a risk of splashing from water and cleaning solutions
