6
1
2
GETTING READY TO SEW –
25
Adjusting stitch length
Turn the stitch length dial until the required length is
indicated.
The higher the number, the longer the stitch. This dial can
adjust the stitch length from 1 to 5mm.
Adjusting overedge cutting width
Overedge cutting width can be adjusted from 4 to 7mm by
simply turning overedge cutting width dial according to the
type of fabric.
It is set at standard width of 6mm when delivered from the
factory.
Turn it towards “5” if fabric edge puckers while sewing.
( Fig.1)
Turn it toward “7” if loops hang off the edge. (Fig.2)
Stitch finger (B)
Loops may hang off the edge, when you sew with lightweight fabric using 3 threads (right needle only), and setting cutting width
dial at 4-5(Fig. 3). In such a case change the stitch finger(A) to (B) to get neat stitching(Fig. 4).
Fig.2
Fig.1
Fig.3
Fig.4
Stitch finger(B)
Cross section
Stitch length dial
Overedge cutting
width dial
