Husqvarna TS 510 G, Руководство оператора

Страница: 13 / 24

When unpacked, this unit consists of three (3) parts:
Frame Assembly (1), Conveyor Cart Assembly (),
Engine Air Cleaner Cover (3).
13
•Mandatory
•Obligatorio
•Indication
•Indicación
•Warning Triangle
•Triángwulo De
Advertenciao
•Prohibition
•Prohibición
These signs will give advice for your safety.
Follow our instructions strictly and your machine
will give you long service in normal operating condi-
tions.
1. Features
2. Assembly
Use: Wet or Dry sawing of masonry and refractory.
Tools: Diamond blades -- dry or water cooled,
Ø: 14” (350 mm), and 0” (500 mm)
with Arbor Ø 1” (5.4 mm).
Depths of Cut (Maximum):
8.00” (17 mm) with Ø 0” (500 mm) blade
Maximum material Size:
8 x 8 x 16” (0,3 x 0,3 x 40,6 cm) block
Nominal Weight: See “Specifications”
Operating Weight: See “Specifications”
Dimensions: See “Saw Dimensions”
Blade Guard Capacity:
14” (350 mm), 18” (450 mm), and 0” (500 mm) Ø.
Smaller Blade Diameter not recommended because
blade will not contact the conveyor cart. Head tilt is
limited by the depth stop, which also prevents cut-
ting through the conveyor cart when the blade is in
the lowest position.
Blade Shaft RPM: See “Specifications”
3
44
Before leaving our factory every machine
is thoroughly tested.
Before starting up machine make
sure you read these instructions and
are familiar with the operation of this
machine.
The working area must be completely
clear, well lit and all safety hazards
removed (no water or dangerous
objects in the vicinity).
The operator must wear
protective clothing appro-
priate to the work he is
doing. We recommend
hearing, respiratory and
eye protection.
Any persons not involved in the work,
should leave the area.
Remove the Conveyor Cart Assembly () from its
shipping carton. Set it onto the Frame Assembly (1)
so that the wheels of the Conveyor Cart Assembly
() roll along the sides of the Frame Assembly (1).
Remove the Engine Air Cleaner Cover (3) and
install it onto the engine using the Wing Nut (44)
that is loosely installed above the engine air cleaner
element.
1
WARNING!
Use only blades marked with a maximum operat-
ing speed greater than the blade shaft speed.