The instructions for use and spare parts found in this document are for information only and are not binding. As part
of our product quality improvement policy, we reserve the right to make any and all technical modifications without
prior notice.
The manufacturer accepts no
responsibility caused by unsuitable
use or modifications.
ANGLE GUIDE
PROTRACTOR
MIGHTY MITER GUIDE
BULLNOSE
FOLDING STAND
542 05 10-20*
542 05 10-10*
542 16 14-80*
542 05 10-30*
542 20 32-52*
RIP FENCE
: 542 05 10-00* - The Rip Fence is a standard
accessory supplied with every tile saw. It is used
to provide a repeatable position for rip cuts until
relocated. The Rip Guide clamps to the machined
backstop of the conveyor cart.
ADJUSTABLE PROTRACTOR:
542 05 10-10* - The
Protractor can be used to rip cut known angles. The
protractor clamps to the backstop.
DUAL 45 ANGLE GUIDE:
542 05 10-20* - This is a non-
adjustable miter used to quickly position the tile at
45 degrees; either on the left or right side. It is often
used for repeated diagonal rip cuts. The Angle Guide
clamps to the backstop.
BULLNOSE MITER GUIDE:
542 05 10-30* -This is a fixed
guide that positions the tile for a 45 degree miter cut.
The Mitering Guide clamps to the backstop.
MIGHTY MITER GUIDE:
542 05 01-02* - This is a 45
degree fixture that has an adjustable clamp to hold
the tile while miter cutting. The Mitering Guide clamps
to the backstop.
FOLDING STAND:
542 20 32-52* - This stable stand
brings a Husqvarna® tile saw to standing level for
ease of work. The stand conveniently folds flat for
storage and transporting.
ADJUSTABLE ROLLING STAND:
542 20 32-53 - This
flexible-use stand can be adjusted from 29” to 33” in
height. It has standard rear wheels for easy transpor
-
tation. When stand is collapsed, the front legs become
handles to wheel saw to and from jobsite. Springs
assist the raising and lowering of the saw. Addi tional
wheels are available to make rolling collapsed saw /
stand onto truck easier.
CART EXTENSION:
542 20 30-37 - Fastens to front edge
of 16-1/2” L x 16” W Conveyor Cart (542 20 30-83).
Adds 5-1/4” to length to help support larger tile.
Parts List:
Diag.
Part No.
Qty. Description
Diag.
Part No.
Qty. Description
1
542 05 01-04*
1
Frame, Miter
10
N/A
1
Arm, Protractor
.
2
542 05 01-07*
1
Bar, Locking
11
542 02 00-11*
1
Carriage Bolt, 1/4”-20 x 5/8”
.
3
542 05 01-05*
1
Clip, Stop
12
542 02 02-44*
1
Wing Nut, 1/4”-20 x 1”
.
4
542 05 01-06*
1
Spring
13
542 18 97-37*
1
Knob, 1/4”-20 x 1”
.
5
542 05 01-03*
1
Knob
14
542 05 10-10*
1
Protractor Assy
.
6
542 18 97-37*
2
Knob, 1/4”-20 x 1”
15
542 02 05-98*
1
Screw, Thumb, 1/4”-20 x 1”
.
7
542 05 10-20*
1
Miter Assy, 45
°
16
542 05 10-30*
1
Holder Assy, Bullnose
.
8
542 18 97-37*
1
Knob, 1/4”-20 x 1”
17
542 20 32-52*
1
Stand, Tile Saw
(for TS250X only)
.
9
N/A
1
Sector Plate
18
542 05 01-02*
1
Support Assy, Miter Frame
.
15
TILE CUTTING ACCESSORIES
