Husqvarna TE 250, Руководство пользователя

Страница: 19 / 169

CONTROLS 6
17
6.5 Stop button (All US standard models)
H03654-10
The stop button
1
is fitted on the left side of the handlebar.
Possible states
• The stop button is in the basic position
–
In this position,
the ignition circuit is closed and the engine can be started.
• Stop button pressed
–
In this position, the ignition circuit
is interrupted, a running engine stops, and a non-running
engine will not start.
6.6 Horn button (All EU/AR standard models)
S04407-12
Horn button
1
is fitted on the left side of the handlebar.
Possible states
• The horn button is in the basic position
• The horn button is pressed
–
The horn is operated in this
position.
6.7 Light switch (All EU/AR/CN standard models)
S04407-11
Light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on
–
Light switch is in the central posi-
tion. In this position, the low beam and tail light are
switched on.
High beam on
–
Light switch is turned to the left.
In this position, the high beam and tail light are
switched on.
6.8 Light switch (All US standard models)
H03655-10
The light switch
1
is located to the left of the combination
instrument.
Possible states
• Light off
–
Light switch is pressed in up to the stop. In this
position, the light is switched off.
• Light on
–
Light switch is pulled out to the stop. In this posi-
tion, the low beam and tail light are switched on.