Husqvarna TC 85 2020, Руководство пользователя

Страница: 40 / 136

10 TUNING THE CHASSIS
38
Guideline
Rebound damping
Comfort 18 clicks
Standard 15 clicks
Sport 12 clicks
Info
Turn clockwise to increase the damping; turn counter-
clockwise to reduce the damping.
10.7 Measuring the dimension of the rear wheel unloaded
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 46)
400988-10
Main work
–
Measure the vertical distance between the rear axle and a
fixed point such as a marking on the side cover.
–
Note the value as dimension
A
.
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 46)
10.8 Checking the static sag of the shock absorber
400989-10
–
Measure dimension
A
of rear wheel unloaded. ( p. 38)
–
Hold the motorcycle upright with aid of an assistant.
–
Measure the distance between rear axle and fixed point
again.
–
Note the value as dimension
B
.
Info
The static sag is the difference between measure-
ments
A
and
B
.
–
Check the static sag.
Static sag 30 mm (1.18 in)
» If the static sag is less or more than the specified value:
–
Adjust the spring preload of the shock absorber.
(
p. 39)