Husqvarna T540i XP Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 32

Husqvarna T540i XP Скачать руководство пользователя страница 3

3. Start/stop button
4. Warning indicator
5. Battery indicator
6. SavE button
7. Information and warning decal
8. Top handle
9. Belt eyelet
10. Rope eyelet
11. Fan housing
12. Front handle
13. Chain oil tank
14. Power trigger lockout
15. Power trigger
16. Oil adjustment screw
17. Spiked bumper
18. Bar tip sprocket
19. Saw chain
20. Guide bar
21. Chain catcher
22. Chain tensioning screw
23. Drive sprocket cover
24. Guide bar cover
25. Indicator for state of charge
26. Warning indicator
27. Power cord
28. Combination wrench
29. Battery charger (accessory)
30. Button, battery status
31. Battery status
32. Warning indicator
33. Battery release button
34. Battery (accessory)
35. Operator's manual

Symbols on the product

Risk of serious injury or death to the

operator or others. Be careful and use

the product correctly. Read the

operator's manual carefully and

understand the instructions before

operation of the product.

Use approved protective helmet, hearing

protection and eye protection.

This product complies with applicable EC

Directives.

Noise emission to the environment

complies with applicable EC Directives.

The noise emission of the product is

specified in

Technical data on page 27

and on the decal.

Use approved protection for feet, legs,

hands and arms.

Use 2 hands when you operate the

product.

Warning! Kickback can occur when the

guide bar tip touches an object. This

causes the guide bar to be thrown in the

direction of the operator. Risk of serious

injury or death.

L-Max

XX mm / XX"

The direction in which the saw chain

rotates and maximum length of the guide

bar.

Chain brake, engaged (right). Chain

brake, disengaged (left).

Chain oil.

Rated voltage, V.

Direct current.

Protected against splashing water.

Environmental mark. The product or

package of the product is not domestic

waste. Recycle it at an approved

disposal location for electrical and

electronic equipment.

If the product features

Bluetooth

®

wireless technology. The Bluetooth

®

symbol will be marked on the product

name label. Refer to

technology on page 13

.

1036 - 005 - 29.06.2020

3

«
1
2
3
4
5
...
»

Содержание T540i XP

































Отзывы:

Нет отзывов