Husqvarna Rider Pro 15, Руководство оператора

Страница: 12 / 84

10
– English
8009-467
8010-061
Never drive the machine in an enclosed space
Regularly clean grass, leaves and other debris from the
machine
SAFETY INSTRUCTIONS
• Do not change the setting of governors and
avoid running the engine at excessively high
revs. If you run too fast, you risk damaging the
machine components.
• Observe the risk of injury caused by moving or
hot parts if the engine is started with the engine
cover open or protective cowlings removed.
• Never use the machine indoors or in spaces
lacking proper ventilation. Exhaust fumes
contain carbon monoxide, an odourless,
poisonous and highly dangerous gas.
• Stop and inspect the equipment if you run over
or into anything. If necessary, make repairs
before starting.
• Never make adjustments with the engine
running.
• The machine is tested and approved only with
the equipment originally provided or
recommended by the manufacturer.
• The blades are sharp and can cause cuts. Wrap
the blades or wear protective gloves when
handling them.
• Check regularly that the parking brake works.
Adjust and maintain as required.
• The mulching unit should only be used where
better quality mowing is required and in known
areas.
• Reduce the risk of fire by removing grass, leaves
and other debris that may have fastened on the
machine. Allow the machine to cool before
putting it in storage.
Transport
• The machine is heavy and can cause serious
crush injuries. Be especially careful when it is
loaded in or out of a car or on and off of a trailer.
• Use an approved trailer to transport the
machine.
Activate the parking brake and secure the
machine using approved fasteners, such as
straps, chains or ropes when transporting.
• Check and observe local road traffic regulations
before transporting or driving the machine on
roads.
IMPORTANT INFORMATION
The parking brake is not sufficient to lock
the machine during transport. Ensure you
secure the machine firmly to the trans-
porting vehicle.