Husqvarna RA-V, Руководство оператора

Страница: 10 / 32

2. Remove the 4 screws (D), the lower blade (E) and
the shim (F).
D
E
F
3. Remove the 4 screws (G) and the top blade (H).
G
H
4. Install the blades in opposite sequence. Tighten the
screws equally when you install the blades.
5. Torque the screws (G) to 9-12 Nm.
6. Torque the screws (D) to 9-12 Nm.
7. Torque the center screw (A) to 15-20 Nm.
To adjust the clearance between the
blades
WARNING: Use protective gloves when you
hold the blades.
1. Remove the lower blade, refer to
To replace the
blades on page 9 .
2. Remove the shim.
Note: Save the shim until it is time to replace the
blades.
3. Install the lower blade. Tighten the screws equally
when you install the blades.
To replace the cutting attachment
guard
WARNING: Use protective gloves when you
hold the blades
• Remove the 2 screws (B) and the cutting attachment
guard (A).
• Install the new cutting attachment guard (A) with the
2 screws (B). Tighten the screws equally.
A
B
10 1051 - 001 - 18.04.2019