Husqvarna MZ52, Руководство оператора

Страница: 21 / 84

Maintenance Schedule
Following is a list of maintenance procedures
that must be performed on the machine. For
those points not described in this manual, visit an
authorized service workshop. An annual service
carried out by an authorized service workshop
MAINTENANCE
DAILY
AT
LEAST
ONCE
EACH
YEAR
MAINTENANCE
INTERVAL
IN HOURS
BEFORE AFTER 50 250 500
CHECK
Park brake for adjustment
● ● ● ● ●
Engine’s oil level (every refueling)
■
Safety system
●
For fuel and oil leakages
♦
For damage
♦ ♦ ♦ ♦
For loose hardware (screws, nuts)
●
For mower deck damage
●
Tire pressures
● ● ● ●
Battery connections
● ● ● ●
CLEAN
Engine’s cooling air intake
■
Under the mower deck
● ● ● ●
Around the engine
♦ ♦ ♦ ♦
Around belts, belt pulleys
♦ ♦ ♦ ♦
Engine’s cooling air intake
2)
■ ■ ■ ■
Air cleaner foam pre-filter
2)
■ ■
Air cleaner paper filter cartridge
2)
■ ■
ALSO
Inspect muffler/spark arrestor
♦ ♦ ♦ ♦
Start the engine & blades, listen for unusual sounds
♦
Sharpen
3)
/ Replace mower blades
● ● ● ●
1)
First change after 8-10 hours. When
operating with a heavy load or at high ambient
temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement
are required more often.
3)
Performed by authorized service workshop.
is recommended to maintain your machine in
the best possible condition and to ensure safe
operation.
Read
General Maintenance
in the Safety
section.
●
= Described in this manual
♦
= Not described in this manual
■
= Refer to the engine manufacturer’s manual
21
MAINTENANCE