manualshive.com logo in svg

Husqvarna LT1942, Руководство пользователя, Страница: 7 / 44

Поделиться
Скачать
Husqvarna LT1942 Скачать руководство пользователя страница 7

7

24

66

02464

SEAT PAN

SHOULDER 

BOLT

ADJUSTMENT 

KNOB

FLAT WASHER

SEAT

FIG. 3

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.
•  Remove adjustment knob and flat washer securing 

seat to cardboard packing and set aside for assembly 

of seat to tractor.

• 

Pivot seat upward and remove from the cardboard pack-

ing. Remove the cardboard packing and discard.

•  Place seat on seat pan so head of shoulder bolt is 

positioned over large slotted hole in pan.

• 

Push down on seat to engage shoulder bolt in slot and 

pull seat towards rear of tractor.

•  Pivot seat and pan forward and assemble adjustment 

knob and flat washer loosely. Do not tighten.

 

Lower seat into operating position and sit on seat.

• 

Slide seat until a comfortable position is reached which 

allows you to press clutch/brake pedal all the way 

down.

•  Get off seat without moving its ad just ed position.
•  Raise seat and tighten adjustment knob securely.

ATTACH HOOD SCOOP (See Fig. 4)

ASSEMBLY

FIG. 4

Содержание LT1942













































Отзывы:

Нет отзывов