4. Pull out the guide roller from the product.
5. Install the knob and tighten it fully. Then loosen the
knob 2 turns.
6. Install the new guide roller in the product.
7. Lubricate the guide rollers. Refer to
guide rollers on page 23
.
8. Install the cutting blade and the support roller guard.
To install the cutting blade on page 11
.
To replace the support rollers
The support rollers must be examined 2 times during the
life of the cutting blade. Do a check after the installation
of the cutting blade and when the cutting blade starts to
become worn. Replace the support rollers when the
surface is flat. The illustration shows a new support
roller (A) and a worn support roller (B).
A
B
1. Remove the support roller guard.
2. Remove the support rollers with the 19 mm open
wrench and the 13 mm combination wrench.
24
1461 - 001 - 17.02.2020
Содержание K 7000 Ring
Страница 123: ...1461 001 17 02 2020 123 ...