Husqvarna J-handle set 335L X-series, Руководство оператора

Страница: 2 / 10

2 –
English
CONTENTS
Contents
Note the following before starting:
Please read the oper ator’s manual carefully and make sure
you understand the instructions before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
The J-handle set contains the following
parts:
• 1 J-handle
• 3 screws M5x16
• 1 combination guard
• 1 harness
• 1 grass blade
• 1 support cup
• 1 support fl ange
• 1 nut
• 1 socket spanner
• 1 transport guard
CONTENTS
Contents ...................................................................... 2
Note the following before starting: ................................ 2
WHA T IS WHAT?
What is what? .............................................................. 3
SAFETY INSTR UCTIONS
Cutting equipment ........................................................ 4
Sharpening grass cutters and grass blades ................. 4
General working instructions ....................................... 4
ASSEMBL Y
Fitting the J-handle ..................................................... 6
Adjusting the harness .................................................. 6
Assembling the cutting equipment ............................... 6
Fitting the guard extension ........................................... 6
Fitting the combination guard, grass blade and grass
cutter ............................................................................
7
ST ARTING AND STOPPING
Chec k before starting ................................................... 8
TECHNICAL D ATA
T echnical data .............................................................. 8
!
W ARNING! Under no circumstances may the
design of the machine be modi fi ed without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modi
fi cations and/or accessories can result
in serious personal injury or the death of the
operator or others.
!
W ARNING! This accessory may only be used
together with the intended trimmer, see
under heading ”Approved accessories” in
chapter Technical data in the machine's
Operator's Manual.
!
W ARNING! Only grass blades/grass cutters
or trimmer heads/plastic blades may be used
when the J-handle is
fi tted. Saw blades must
never be used with the J-handle.
IMPOR TANT! The trimmer guard must be replaced with the
accompanying combination guard if a grass blade is fi tted
to the machine.
IMPORTANT! Wear boots with steel toe-caps and non-slip
sole if a grass blade is
fi tted to the machine.