Husqvarna FS 450 2015, Руководство по ремонту

Страница: 215 / 249

27
SERVICE SCHEDULE
27 .1
Service schedule
213
Every 30 operating hours - corresponds to about 210 liters of fuel (55.5 US gal)
Every 20 operating hours - corresponds to about 140 liters of fuel (37 US gal)
Every 10 operating hours - corresponds to about 70 liters of fuel (18.5 US gal)/ after every race
Once after 1 operating hour - corresponds to about 7 liters of fuel (1.8 US gal)
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool.
0
•
I
•
•
Check and charge the battery.
I I
• I • •
Check the front brake linings. ( l!!ll p. 111)
I
I
• I •
•
Check the rear brake linings. ( l!!ll p. 116)
I
I
• I •
•
Check the brake discs. ( a p. 92)
I
I
• I •
•
Check the brake lines for damage and leakage.
I
I
• I • •
Check the rear brake fluid level. ( a p. 118)
I
I
• I • •
Check the free travel of the foot brake lever. ( � p. 117)
I
I
• I •
•
Check the frame and swingarm.
I
I
• I •
•
Check the swingarm bearing.
I
I
I •
Check the heim joints at the top of the shock absorber.
I
I
• I • •
Check the shock absorber linkage.(� p. 51)
I
I
• I •
•
Conduct a minor fork service. ( l!!ll p. 15)
I
I
•
I
•
•
Conduct a major fork service. ( a p. 15)
I
•
Check the tire condition. ( a p. 91)
0
• I •
•
Check the tire air pressure. ( � p. 91)
0
•
I
• •
Check the wheel bearing for play.
I I
• I •
•
Check the wheel hubs.
•
I
•
•
Check the rim run-out. ( a p. 93)
0
• I •
•
Check the spoke tension. ( � p. 92)
0
• I •
•
Check the chain, rear sprocket, engine sprocket, and chain guide. ( l!!ll p. 100)
•
I
• •
I I
Check the chain tension. ( � p. 99)
I
o
I
• I • •
Grease all moving parts (e.g., hand lever, chain, ... ) and check for smooth operation.
I
I
• I • •
Check/correct the fluid level of the hydraulic clutch. ( � p. 188)
I
I
• I •
•
Check the front brake fluid level. ( l!!ll p. 113)
I
I
• I •
•
Check the free travel of the hand brake lever.
• I •
•
Check the steering head bearing play. ( a p. 39)
0
• I • •
Check the valve clearance.
0
I •
Check the clutch.
I •
Change the engine oil and oil filter and clean the oil screens. ( � p. 196)
0
• I •
•
Check all hoses (e. g. fuel, cooling, bleeding, drainage) and sleeves for tearing, leaks and incorrect routing.
0
• I •
•
Check the antifreeze and coolant level. ( � p. 192)
0
• I • •
Check the cables for damage and routing without sharp bends.
• I • •
Check that the cables are undamaged, routed without sharp bends and set correctly.
0
•
I
•
•
Clean the air filter and air filter box. ( a p. 78)
• I •
•
I I
Change the glass fiber yarn filling of the main silencer. ( � p. 75)
I •
Check the screws and nuts for tightness.
0
•
I
• •
Change the fuel screen.(� p. 88)
I
0
I
• I •
•
Check the fuel pressure. ( a p. 83)
• I • •
Check idle.
0
• I •
•
Final check: Check the vehicle for safe operation and take a test ride.
0
• I •
•
Read out the fault memory after the test ride using the Husqvarna Motorcycles diagnostics tool.
0
• I •
•
Make the service entry in the Husqvarna Motorcycles Dealer.net and in the Service and Warranty Booklet.
0
• I • •
o One-time interval