Husqvarna F2401V5, Руководство пользователя

Страница: 115 / 152

TUNING THE ENGINE 16
113
Info
Turn clockwise to decrease the idle speed.
Turn counterclockwise to increase the idle speed.
Make the setting in small steps.
An incorrect idle speed can have a negative impact on
overall engine running.
16.5 Programming ambient air pressure
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling them may result in unconsciousness and
death.
–
Always make sure there is sufficient ventilation when running the engine.
–
Use effective exhaust extraction when starting or running the engine in an enclosed space.
Info
If the vehicle is ridden with the engine running at various heights above sea level, the ambient pressure
is programmed on an ongoing basis.
If the vehicle is transported over great height differences, the ambient pressure must be reprogrammed.
H02349-01
–
Start the vehicle at the new height above sea level and switch
off the engine again.
–
Wait for at least five seconds.
–
Start the vehicle again and check the response of the vehicle.
» If the response has not improved:
–
Repeat the procedure.
16.6 Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
When the shift lever keeps touching the boot, the transmission will be subject to an excessive load.
400692-10
–
Sit on the vehicle in the riding position and determine
distance
A
between the upper edge of your boot and the
shift lever.
Distance between shift lever
and upper edge of boot 10 … 20 mm (0.39 …
0.79 in)
» If the distance does not meet specifications:
–
Set the basic position of the shift lever. ( p. 114)