Husqvarna F2303R0, Руководство по ремонту

Страница: 218 / 333

17 ENGINE
17.4.38 Checking the clutch
216
Check clutch throw-out
O
for damage and wear.
If there is damage or wear:
-
Change the clutch push rod.
Place the clutch push rod
f9
on a flat surface and check for run-out.
If there is run-out:
-
Change the clutch push rod.
Check the contact surface of clutch pressure cap
8
for damage and wear.
If there is damage or wear:
-
Change the clutch pressure cap.
Check outer pretension ring
C,
for damage and wear.
If there is damage or wear:
-
Change outer pretension ring.
Check outer spring washer
0
for damage and wear.
If there is damage or wear:
-
Change outer spring washer.
Check inner pretension ring
(D
for damage and wear.
If there is damage or wear:
-
Change inner pretension ring.
Check inner spring washer @ for damage and wear.
If there is damage or wear:
-
Change inner spring washer.
Check release ring
@)
for damage and wear.
If there is damage or wear:
-
Change release ring.
Check sleeves
@)
for damage and wear.
If there is damage or wear:
-
Change the sleeves.
Check clutch center Gi) for damage and wear.
D04619-10