Husqvarna F2301V1, Руководство пользователя

Страница: 36 / 140

9 SERVICE SCHEDULE
34
after every race
Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
After 5 operating hours
After 1 operating hour
Check that the throttle cables are undamaged, routed without sharp bends, and
set correctly.
○ ● ● ● ●
Clean the air filter and air filter box. ( p. 61)
● ● ● ●
Change the glass fiber yarn filling of the main silencer. ( p. 63)
● ●
Service the fork.
●
Perform the shock absorber service.
●
Check the tightness of the easily accessible, safety-relevant screws and nuts.
○ ● ● ● ●
Check the idle speed.
○ ● ● ● ●
Final check: Check the vehicle for operating safety and take a test ride.
○ ○ ● ● ● ●
Make a service entry in Husqvarna Motorcycles Dealer.net .
○ ○ ● ● ● ●
○
One-time interval
●
Periodic interval
9.3 Recommended work
every 48 months
every 12 months
Every 40 operating hours
After 20 operating hours / Every 20 operating hours
After 10 operating hours / Every 10 operating hours
Change the front brake fluid.
● ●
Change the rear brake fluid.
● ●
Change the hydraulic clutch fluid. ( p. 76)
● ●
Lubricate the steering head bearing. ( p. 54)
● ●
Service the fork.
○
Perform the shock absorber service.
○
Check/adjust the carburetor components.
● ● ●
Change the needle jet.
● ● ●
Change the coolant. ( p. 100)
●
Perform minor engine service. (Check the reed valve housing, reed valve, and intake
flange. Check the clutch. Under difficult operating conditions: Change the piston and
check the cylinder and Z dimension.)
● ● ●
Perform the intermediate engine service. (Change the piston and check the cylinder
and Z dimension. Check the exhaust control for functioning and smooth operation.)
● ●
Perform major engine service including removing and installing the engine. (Change
the connecting rod, conrod bearing, and crank pin. Check the transmission and shift
mechanism. Change all engine bearings.)
●
○
One-time interval
●
Periodic interval