Husqvarna F2203V4, Руководство пользователя

Страница: 77 / 166

SERVICE WORK ON THE CHASSIS 12
75
S03541-10
(US)
–
Remove all the screws on the main silencer.
–
Take off silencer cap
1
with the filter and O-ring
2
.
–
Remove glass fiber yarn filling
3
from main silencer
4
.
–
Clean the parts that need to be reinstalled and check for
damage.
–
Mount the new glass fiber yarn filling between the inner
tube and the outer tube.
–
Position the silencer cap with the filter and the O-ring in
the outer tube.
–
Mount and tighten all of the screws.
Guideline
Screws on main
silencer M5 7 Nm (5.2 lbf ft)
Finishing work
–
Install the main silencer. ( p. 72)
–
Install the right side cover. ( p. 71)
–
Mount the seat. ( p. 67)
–
Install the air filter box cover. ( p. 68)
12.31 Removing the fuel tank
Danger
Fire hazard Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
–
Keep fuels correctly in a suitable canister, and out of the reach of children.
Preparatory work
–
Remove the air filter box cover. ( p. 68)